NOVEXX Solutions Windows Printer Drivers

LATEST VERSION 10.6.0March 18, 2024

NOVEXX Solutions

Download Loftware’s Free NOVEXX Solutions Printer Driver to print from any Windows application. Optimize printer performance by using Loftware Cloud to design your bar code and RFID labels and tags and your coding and marking messages easily, ready to print.

Enter your information to download NOVEXX Solutions printer driver

Version

March 18, 2024

10.6.0

Read release notes

Supported printers

See all supported printers

Installation guides

English

Tested on

Windows 8.1 | 10 | 11 | 8.1 | 10 | 11

Windows Server 2012 R2 | 2016 | 2019 | 2022 | 2012 R2 | 2016 | 2019 | 2022

Release Notes

10.6.0

  • Update port monitor functionality to prevent possible memory consumption.
  • This is initial release of Loftware printer driver, rebrand from NiceLabel printer driver family.

Supported Printers

NOVEXX Solutions 64-04

NOVEXX Solutions 64-04 RFID

NOVEXX Solutions 64-05

NOVEXX Solutions 64-05 RFID

NOVEXX Solutions 64-06

NOVEXX Solutions 64-06 RFID

NOVEXX Solutions 64-08

NOVEXX Solutions 64-08 RFID

NOVEXX Solutions ALX 734 PMA

NOVEXX Solutions ALX 735 PMA

NOVEXX Solutions ALX 736 PMA

NOVEXX Solutions ALX 924

NOVEXX Solutions ALX 924 RFID

NOVEXX Solutions ALX 925

NOVEXX Solutions ALX 925 RFID

NOVEXX Solutions ALX 926

NOVEXX Solutions ALX 926 RFID

NOVEXX Solutions AP 4.4 200dpi

NOVEXX Solutions AP 4.4 300dpi

NOVEXX Solutions AP 5.4 200dpi

NOVEXX Solutions AP 5.4 200dpi RFID

NOVEXX Solutions AP 5.4 300dpi

NOVEXX Solutions AP 5.4 300dpi RFID

NOVEXX Solutions AP 5.6 200dpi

NOVEXX Solutions AP 5.6 300dpi

NOVEXX Solutions DPM - 04

NOVEXX Solutions DPM - 04 RFID

NOVEXX Solutions DPM - 05

NOVEXX Solutions DPM - 05 RFID

NOVEXX Solutions DPM - 06

NOVEXX Solutions DPM - 06 RFID

NOVEXX Solutions PEM - 04

NOVEXX Solutions PEM - 05

NOVEXX Solutions PEM - 06

NOVEXX Solutions XLP 504 200dpi

NOVEXX Solutions XLP 504 300dpi

NOVEXX Solutions XLP 504 600dpi

NOVEXX Solutions XLP 506 200dpi

NOVEXX Solutions XLP 506 300dpi

NOVEXX Solutions XPA 934

NOVEXX Solutions XPA 935

NOVEXX Solutions XPA 936

NOVEXX Solutions XLP 514 203dpi

NOVEXX Solutions XLP 514 300dpi

NOVEXX Solutions XLP 514 600dpi

NOVEXX Solutions XLP 516 300dpi

NOVEXX Solutions XLP 604

NOVEXX Solutions XLP 605

NOVEXX Solutions XLP 606

NOVEXX Solutions XPM 944

NOVEXX Solutions XPM 945

NOVEXX Solutions XPM 946

NOVEXX Solutions XDM 944

NOVEXX Solutions XDM 945

NOVEXX Solutions XDM 946

Can’t find your model?
Check under end of life drivers.

Release Notes

10.6.0

  • Update port monitor functionality to prevent possible memory consumption.
  • This is initial release of Loftware printer driver, rebrand from NiceLabel printer driver family.

10.5.3

  • Modified drivers are again recognized by NiceLabel LMS storage.

10.5.2

  • Optimized printers storage space when storing layouts to the printer.
  • Corrected delay functionality for Cancel all current and queued jobs on the printer.
  • Driver core stabilization by improving memory and heap allocations.
  • Redesigned the self extracting driver package users download from the internet web page.
  • Stabilized driver's communication component.

10.5.0

  • Added support for requesting multiple status queries at the same time.
  • Printer options resolution, darkness and speed are now correctly merged when changing printer models.
  • Stabilized communication interface between the driver and the Label Design application.
  • Removed limitation of loaded driver packages on Server 2008 and Server 2016 system.

10.3.3

  • Cancel all jobs command is updated.
  • YN fonts are represented with Arial TTF for better WYSIWYG on the printer.

10.2.3

  • Week of the year is now printed correctly.
  • Added XLP60x and XPM94x series
  • Added support for XDM94x series.
  • Printing on standard TCP/IP port is working also in case when bidirectional support is turned on and status checking is enabled.
  • Operation offset is available also for normal and tear off modes.

10.2.2

  • Fixed crash of driver when document name longer than 260 characters

10.0.0

  • Fixed problems in case user set different HDPI and VDPI in landscape orientation.
  • Menu for using settings from printer or driver is redesigned and improved.
  • Added capability to set all printer supported parameters to be controlled by the printer.
  • Added support for web based printer management.
  • Change the print preview so when the label is too long the end of the label is visible.

8.7.0

  • Correct RTF element position when printing from NiceLabel software. Correct graphic position when printing from Windows applications.

8.6.3

  • Driver is signed with updated certificate. Changed timestamp server to avoid "unknown certificate" issue on some OS systems.

8.6.0

  • This is completely new driver release, based on new driver platform. The driver was extensively tested with different NiceLabel software versions. We suggest that you verify existing labels and solutions before you start using this printer driver in production.

{"5.1.15":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2008 | 2008 R2 | 2012"},"version":"5.1.15","date":"May 17, 2016"},"5.1.16":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2008 | 2008 R2 | 2012"},"version":"5.1.16","date":"February 7, 2017"},"5.2.0":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2008 | 2008 R2 | 2012"},"version":"5.2.0","date":"June 20, 2018"},"5.3.0":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2008 | 2008 R2 | 2012"},"version":"5.3.0","date":"December 18, 2018"},"5.3.3":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"5.3.3","date":"October 2, 2019"},"5.3.6":{"testedOnPlatforms":{"Windows":"8.1 | 10 | Vista | 7 | 8","Windows Server":"2012 R2 | 2016 | 2019 | 2008 | 2008 R2 | 2012"},"version":"5.3.6","date":"May 21, 2020"},"8.6.0":{"testedOnPlatforms":{"Windows":"8.1 | 10","Windows Server":"2012 R2 | 2016 | 2019"},"version":"8.6.0","date":"February 17, 2021"},"8.7.0":{"testedOnPlatforms":{"Windows":"8.1 | 10","Windows Server":"2012 R2 | 2016 | 2019"},"version":"8.7.0","date":"July 20, 2021"},"10.0.0":{"testedOnPlatforms":{"Windows":"8.1 | 10 | 11","Windows Server":"2012 R2 | 2016 | 2019 | 2022"},"version":"10.0.0","date":"September 30, 2021"},"10.2.3":{"testedOnPlatforms":{"Windows":"8.1 | 10 | 11","Windows Server":"2012 R2 | 2016 | 2019 | 2022"},"version":"10.2.3","date":"June 30, 2022"},"10.3.3":{"testedOnPlatforms":{"Windows":"8.1 | 10 | 11","Windows Server":"2012 R2 | 2016 | 2019 | 2022"},"version":"10.3.3","date":"January 12, 2023"},"10.5.0":{"testedOnPlatforms":{"Windows":"8.1 | 10 | 11","Windows Server":"2012 R2 | 2016 | 2019 | 2022"},"version":"10.5.0","date":"October 13, 2023"},"10.5.2":{"testedOnPlatforms":{"Windows":"8.1 | 10 | 11","Windows Server":"2012 R2 | 2016 | 2019 | 2022"},"version":"10.5.2","date":"December 13, 2023"},"10.5.3":{"testedOnPlatforms":{"Windows":"8.1 | 10 | 11","Windows Server":"2012 R2 | 2016 | 2019 | 2022"},"version":"10.5.3","date":"February 5, 2024"}}

Select version & enter your information to download NOVEXX Solutions printer driver

Version

March 18, 2024

10.6.0

Installation guides

English

Tested on

Windows 8.1 | 10 | 11 | 8.1 | 10 | 11

Windows Server 2012 R2 | 2016 | 2019 | 2022 | 2012 R2 | 2016 | 2019 | 2022

Supported Printers

NOVEXX Solutions 64-04

NOVEXX Solutions 64-04 RFID

NOVEXX Solutions 64-05

NOVEXX Solutions 64-05 RFID

NOVEXX Solutions 64-06

NOVEXX Solutions 64-06 RFID

NOVEXX Solutions 64-08

NOVEXX Solutions 64-08 RFID

NOVEXX Solutions ALX 734 PMA

NOVEXX Solutions ALX 735 PMA

NOVEXX Solutions ALX 736 PMA

NOVEXX Solutions ALX 924

NOVEXX Solutions ALX 924 RFID

NOVEXX Solutions ALX 925

NOVEXX Solutions ALX 925 RFID

NOVEXX Solutions ALX 926

NOVEXX Solutions ALX 926 RFID

NOVEXX Solutions AP 4.4 200dpi

NOVEXX Solutions AP 4.4 300dpi

NOVEXX Solutions AP 5.4 200dpi

NOVEXX Solutions AP 5.4 200dpi RFID

NOVEXX Solutions AP 5.4 300dpi

NOVEXX Solutions AP 5.4 300dpi RFID

NOVEXX Solutions AP 5.6 200dpi

NOVEXX Solutions AP 5.6 300dpi

NOVEXX Solutions DPM - 04

NOVEXX Solutions DPM - 04 RFID

NOVEXX Solutions DPM - 05

NOVEXX Solutions DPM - 05 RFID

NOVEXX Solutions DPM - 06

NOVEXX Solutions DPM - 06 RFID

NOVEXX Solutions PEM - 04

NOVEXX Solutions PEM - 05

NOVEXX Solutions PEM - 06

NOVEXX Solutions XLP 504 200dpi

NOVEXX Solutions XLP 504 300dpi

NOVEXX Solutions XLP 504 600dpi

NOVEXX Solutions XLP 506 200dpi

NOVEXX Solutions XLP 506 300dpi

NOVEXX Solutions XPA 934

NOVEXX Solutions XPA 935

NOVEXX Solutions XPA 936

NOVEXX Solutions XLP 514 203dpi

NOVEXX Solutions XLP 514 300dpi

NOVEXX Solutions XLP 514 600dpi

NOVEXX Solutions XLP 516 300dpi

NOVEXX Solutions XLP 604

NOVEXX Solutions XLP 605

NOVEXX Solutions XLP 606

NOVEXX Solutions XPM 944

NOVEXX Solutions XPM 945

NOVEXX Solutions XPM 946

NOVEXX Solutions XDM 944

NOVEXX Solutions XDM 945

NOVEXX Solutions XDM 946

Release Notes

5.5.0

  • Updated driver package information and driver user interface look with new branding.

5.3.6

  • Corrected driver functionality when "Printer default" option is selected for media type.
  • Two new RTC formats are supported: YYJJJ and YY/JJJ. Previous format YYJJJYhhmmss is replaced with corrected YYJJJhhmmss and needs to be selected again on the existing label format.

5.3.03.7355

  • QR code position is improved for EasyPlug printers.

5.1.01.4360

  • Prevent occasional labeling software crash when loading labels created with NiceLabel drivers older than version 4.6.16.

5.1.01 4402

  • Add a line stating the requirements needed for asian fonts to be printed correctly by the driver.

5.1.00.4354

  • Cutter functionality corrected for printing from Windows applications and cutter set to cut every n labels.

5.1.00.4306

  • Solved problem with multi-thread printing (sometimes the stream is not correct).

5.1.00.4303

  • Corrected cutter quantity issue of number 203.

5.0.00.4197

  • Driver help for barcode font "y dimension" updated.

5.0.00.3897

  • All the drivers are now digitaly signed to allow installation on Windows 8.

4.6.78.3840

  • In some rare cases driver crashed when printing a Code128 barcode. This is corrected now.

4.6.76.3790

  • Fixed occasional Spooler crash when printing Word document with very long filename.

4.6.76.3782

  • Advanced Port monitor can now be added by using Windows Add New Port Type option.

4.6.76.3763

  • Port monitor now reconnectes to printer after lost connection

4.6.74.3714

  • Numeric GS1Databar barcode types no longer have data size requirements

4.6.71.3637

  • Same variable name was used multiple times if RFID HF tag was used. This is corrected now.

4.6.69.3612

  • Driver update didn't preserve settings for all installed printers. This is fixed now.

4.6.69.3608

  • Rotation of RFID Tag Text on label didn't work. This is corrected now.

4.6.66.3658

  • In some case of printing big graphics (color on 64-bit OS for example) the graphic elements could be missing. This is corrected now.

4.6.66.3436

  • Obsolete monitor.inf files were removed from drivers that still had them

4.6.66.3392

  • Removed warning message for special ports, when installing printer driver with Printer Installation Wizard.If connected to standard Windows TCP/IP port then show warning message.

4.6.65.3360

  • Printer error detailes were missing while printing. The status reporting issue was limited to NicePrintQueue, Enterprise Print Manager(EPM) and NiceLabel.:p

4.6.64.3298 Beta

  • QR barcode wasn't printed. This is fixed now.

4.6.64.3290

  • Advanced TCP/IP port monitor now supports connections to names as well as IP addresses.

4.6.63.3224

  • Rotation option on userinterface and QR and MicroQR barcode font rotation now work correctly

4.6.62.3190

  • Spooler crash when changing printer port while printing was fixed.

4.6.62.3156

  • Custom settings for unprintable now work correctly

4.6.61.3131

  • Labels with variable text and/or barcode fields were not handling prefix and suffix on variables. The problem occurs only when using export variant "For Standalone" or "For Standalone - To File". This is corrected now.Update has been done also on special character handling, when export to printer is used on Avery printers. Some characters like "#" needs to be handled different, so driver needs to send "##" to the printer to print "#" character. This has been working fine already when printing directly to the printer, or using export to printer with fixed text on the label. But when user use the variable on the label with data "#", then this special handling did not work. Now this is corrected and # could be printed also when export to printer is used.:p

4.6.61.3089

  • Printing did not work the first time when printer was turned on. User had to retry printing.

4.6.59.3002

  • Printer ports are now properly shown in Options dialog.

4.6.59.2995

  • Changed font for Chinese Windows to SimHei.

4.6.57.2975

  • Problems with Datamatrix barcode on Avery printers corrected: Variables were not used when exporting to printer, character printed incorrectly.

4.6.51.2800

  • Czech, Lithuanian and Ukrainian languages are now supported also in all NiceDrivers.

4.6.50.2773

  • When printing from standard Windows application (like Microsoft Word) and using page rotation (Landscape and/or rotate 180), positions of graphic were shifted relative to internal elements.Shift size depends on page dimensions, shift direction depends on rotation.

4.6.49.2747

  • PrnInst utility was updated so that long INF file structure is supported.

4.6.49.2611

  • When trying to preinstall drivers on Windows 7, user got an "Environment incorrect" error message. This is corrected now.

4.6.46.2541

  • Direct print option added as one of graphic options (Advanced setup > Other).

4.6.43.2463

  • Combined variables in ean128 barcode are now sent correctly when using alternate escape

4.6.43.2445

  • User is now able to change administrator settings without reopening driver properties dialog as an elevated user. A click on the shielded button and entering the credentials is all that is needed.

4.6.41.2364

  • Fixed occasional driver crash when printing extremely large graphics

4.6.41.2361

  • Page preview icons in "Advanced Dialog" corrected.

4.6.37.2258

  • Uninstall of printer with Printer Install Wizard did not work on Windows 2003 (x64) system

4.6.24

  • Support for concatenation on EasyPlug (Avery) printers.With this option several declared variables can be concatenated when label is exported to printer.

4.6.22

  • Build number is now part of version information in About dialog

4.6.12

  • Wrong positioning (white gaps on some graphics) on Novexx Texxtile 200 and Novexx Texxtile 300 printers.

4.6.01

  • Added Rotation to parsed text in command fonts

4.6.00

  • Printing process was stopped during heavy duty printing.
  • International characters in "Scalable YN100" font corrected

4.5.42

  • Driver print speed optimization

4.5.39

  • PrnInst showed login window, even if the user running the application was administrator.

4.5.37

  • PrnInst can now be moved to any position (second monitor) and it will stay there. It will not jump back to its original position.
  • Word documents no longer produce errors on printer.

4.5.35

  • Incorrect RFID command sequence. Lock command was positioned incorrectly.

4.5.34

  • Postnet barcode fonts can no longer have their width changed.

4.5.21

  • Date offset for more than 12 monthsAlternate escapes corrections: - inverse fonts - vector font dimensions - font and barcode rotation - 2D barcodes (PDF417, MaxiCode, Datamatrix, QR) - exported hardware counters

4.5.12

  • User can select Automatic or Manual options for Job removing using keyboard in Printer Install Wizard
  • Fixed labeling software crash when turning off "Use Advanced printer driver interface".
  • Some Avery printers have option for enabling peripheral devices connected to the printer with immediate command.Possible options are:None,Cutter,Rewinder,Tear-off edge,Dispenser,Intern Rewinder,Tear-off +sensor,TCSAP4.4 and AP4.5 models support all options, but 64-0x models support just first four peripheral devices (Cutter,Rewinder,Tear-off edge,Dispenser).

4.5.11

  • Printer Install Wizard uninstallation of driver doesn`t remove all of the files from the SYSTEM32\spool\drivers\w32x86\3\ folder.
  • Datamatrix barcode can be expanded to 60 dots.X and Y expansion size should be identical for Datamatrix barcode!x-expansion for 1D barcodes can be set to 25 max and not just to 16 on H-class models.

4.5.10

  • Addition of QR barcode support on printers supporting Alternate Escape Sequence when Alternate Escapes are enabled.
  • Fixed Date Time offset to correctly send offset times.
  • PDF417 and Datamatrix 2D barcodes supports now also x-expansion size 1 (before 3 was the minimum x expansion factor)WYSIWYG for PDF417 height is corrected now. Before it was printed higher as it was displayed in labeling software.

4.5.09

  • Wrong DPI was set for printer Avery AP4.4 300 DPI printer.
  • Electonic Article Survailance was always disabled on Rfid printers
  • Fixed printing of Datamatrix and QR barcode font with more then 255 character data
  • Added automatic termination character for Maxicode barcode font data

4.5.08

  • New advanced setup options for Avery printers are:1. Enable liner take-up option (button)2. Enable tear-off handling (button) > renamed into "Enable tear off + sensor"3. Dispense Position (edit field):p

4.5.07

  • Added support for custom printer name after silently installing a printer driver from command line (/INSTPRN; /INSTMULTPRN)
  • The date offset for real time clock is not sent by the driver when EasyPlug extensions are used. This is corrected now and it wolks also for extensions.

4.5.06

  • Printer Installation Wizard will be able to automaticly remove all jobs when updating printer

4.5.05

  • Printer Install Wizard can start an application specified in the command line, after it closes.

4.5.03

  • When you disable the option "Use advanced printer driver interface" (in File -> Label Setup -> Printing tab) labeling software will crash with the error "GDI Failure, OK to continue?"
  • Status monitor is able to detect port conflicts, when two printer drivers are using the same port for bidirectional communication with the printer.Also when user will delete or install a new printer to the system, Status Monitor will detect the change by itself.

4.5.02

  • PrnInst didn't set printer attributes correctly. This is fixed now.

4.5.01

  • Turkish language added

4.5.00

  • - write MMF to alternative location (research) - update MemMaster to store files to this location - update driver to read from new location (make sure that the update will be backward compatible)

4.4.73

  • Uninstall of driver package failed when running a 64bti system.

4.4.69

  • Labelling software can now recall variables with more than 31 characters of data.
  • When you click on the Help button in About dialog help is opened, but it is not linked to any page.
  • Help on About dialog opens help page with contents 'This program cannot display the webpage'.
  • Checkbox "Enable bidirectional support" (Printer properties -> Ports) can now be unchecked automatically during driver installation, corresponding to the flag "Bidirectional" in .inf file.Bidirectional=0 => checkbox is unchecked.Bidirectional=1 => checkbox is checked.If this information is ommited, Bidirectional=1 is assumed.

4.4.64

  • Removed Help button as no help is available.
  • Maximum barcode height is limited to page height.
  • New Japanese translation for Printer Install Wizard
  • RLE Compressed graphics are no longer cut for optimization

4.4.63

  • When user starts Printer Install Wizard the application is shown but without focus
  • Changed default number for cutting to 1 label instead of 0.

4.4.62

  • EAN128 barcode can now include one or more Real Time Clock fields.
  • Rfid read and print functionality was disabled on avery rfid models
  • Added byte by byte read and print support for rfid functionality
  • Missing memory field parameter value when using Read and Print functionality
  • Barcodes with Date (or Time) fields in labelling software print printer's escape characters instead of printing date (or time). For example ^Y/^M/^D instead of 07/12/31.

4.4.60

  • Changed file info for Printer Install Wizard
  • Default value for Always use default settings is not correct when instaling it the driver with a configuration file attached.

4.4.52

  • DLL files for user interface translation did not include version info data.
  • Rfid Read and print does not work on Avery printers for Gen2 tags
  • Missing Read and Print of Unique ID on Philips I-Code SLI
  • Labels transfered from different systems now retain their driver settings.
  • Plug & Play ID's were changed for several printers.
  • When using printer template export in File->Export menu of labelling application you get the following error: "An error occured during printer template export".This problem applies to EasyPlug and Labelpoint printers, templates that use "Variables" field and labels with variable Unicode fonts.

4.4.51

  • Command for checking printer status was updated.
  • Increased lenght for filename and path in import and export of settings.
  • POSTNET barcodes have a fixed height and width, but the interface allows the user to change these dimensions.

4.4.50

  • Import and export didn't work if filename and path exceeded the length of 80 characters while windows support 256 character lengths
  • Click on "Stocks" panel caused error if stock list was empty. This is fixed now.

4.4.30

  • - support for preinstall on all supported platforms

4.4.01

  • Avery Philips SLI Rfid tag starting position is now set to zero
  • EndDocument escape was sent even when there was no StartDocument.
  • If driver gets no separator character description for decimal number from the OS, driver puts a "+" or "," string as default character. The result was seen for page size (example)Now the dot character "." is set for default separator in this case.

4.4.00

  • Invalid stocks are now marked. User can open the Stock properties dialog and press OK to fix the problem (which is usually stock dimension). Stock size will be automatically adjusted.
  • UI for commands fonts works now properly also in Japanese language.
  • In some rare cases streams sent to the printer had an extra "0" added in it.
  • Character widths for EasyPlug internal fonts corrected

4.3.74

  • Incorrect Croatian translation is used in the Advanced Setup dialog box for Punch offset. Punched hole is media type with holes used to determine a new label.

4.3.73

  • Added functionality so the user can Read and Store Rfid data

4.3.72

  • Added bidirectional communication with Avery printers.
  • Sometimes a print stream is not send to the printer, and it stays stuck in the spooler

4.3.70

  • Some drivers now support Export/Recall type of printing from labelling application.
  • Barcodes with prefix/suffix are not printed correctly

4.3.64

  • Corrected Philips ICode SLI Rfid tag length and block locking
  • Avery Philips I-Code SLI correction. First 4 blocks are not reserved any more.

4.3.63

  • Printing labels with internal barcodes that use hardware counters together with check digit is now possible on some printers.
  • Port monitor crashed when setting up port details (IP and port number)
  • There has been done some improvement of WYSIWYG for #YN fonts. The character width data are now more accurate then before.

4.3.62

  • Punch offset is now not sent by default. Older labels have punch offset enabled only if the value is not 0.

4.3.61

  • When UCC128 barcode font was used in the document, FNC1 was sent to the pritner although Avery Dennison printers generate FNC1 automaticly.
  • Page lenght was not correct for the TTK 300dpi models.

4.3.60

  • Barcode fonts vanished instead of being imported.
  • When you use "File->Export->Export to Printer" and "For Standalone" method printer displays an error and does not print. This happens when label contains internal barcodes and printer with EasyPlug language is used.

4.3.59

  • Microsoft Vista operating system is not mentioned in the text file that is distributed with the driver.
  • Stocks were not imported if user didn't view the stocks dialog beforehand

4.3.56

  • Barcode ratio values are not shown in Barcode Fonts dialog. This only happens when you are editing existing barcode font.

4.3.55

  • Spooler crashed during the installation, if there were any printers allready installed on the system.
  • Fixed barcode positions so interpretation is visible and outside of barcode.

4.3.54

  • While installing a printer driver on certain systems the spooler crashed.
  • When using RLE compression graphics can come out too large.
  • "delete" button was enabled even if the barcode/command fonts list was empty. This is fixed now.
  • Export of barcode fonts didn't work properly unless user clicked on barcode fonts tab before exporting them. This is fixed now.
  • Increased timeouts for better printer status response times
  • Slow printing occurred when a Not Accessible printer was found on a network. Printer status was also not received immediately.

4.3.53

  • Status for printers (that use bidirectionaal communication) was not correct when the printer was not physicaly connected to the computer. Status was changing between Not Accessible and Ready

4.3.51

  • Driver can now override the default document settings of some applications with driver default settings (set up in printer spooler)
  • When using 'Export to Printer' command in labelling software, terminator character ('#G') is missing. This applies to EasyPlug printers with 'alternate escapes' enabled.

4.3.50

  • Downloaded TrueType fonts can now be recalled in Unicode format.
  • First four blocks cannot be written in Philips I-Code SLI tag.

4.3.07

  • After viewing the Help file CHM file was locked and because of that reboot was needed to complete the installation. New version of driver will not lock the CHM any more and because of that reboot is not needed.

4.3.06

  • Barcode fonts and command fonts are now stored in registry.
  • Printing did not work on nonbidirectional printers. Printer Error was displayed the whole time

4.3.05

  • Printing did not work when bidirectional was enabled

4.3.04

  • New Port monitor is added to the distribution
  • On Windows Vista there is warning displayed if user doesn't have appropriate permissions to create (or write to) certain driver files.
  • Old HLP help file format was exchanged for new CHM file format.
  • When user changed printer's port, the printing was no longer possible until reboot.
  • Port monitor now uses correct (64 bit) interface file on 64bit systems.
  • Installation did not go through when upgrading from old printer driver, if the user had the driver connected to the Advanced Port Monitor (LAN)
  • Bug fixed, where some changes on stocks updated default umprintable area values.

4.3.03

  • Spooler crashed, if user had multiple bidirectional printers using the same port, while using a status monitoring application

4.3.02

  • Stocks were not imported properly or were not shown immediately after import.

4.3.01

  • Korean language added.
  • Driver does not show all stocks in 'Stocks' combo box on 'Options' dialog. Missing stocks have heights that are near the maximum printer's limit.

4.3.00

  • Corrected max label height for following printers: ALX 924, ALX 925, ALX 926, ALX 925 RFID, ALX 926 RFID, AP 7.t 200 dpi, AP 7.t 300 dpi, DPM - 04, DPM - 05, DPM - 06, DPM - 05 RFID, DPM - 06 RFID, TTX 600 200 dpi, TTX 350 200 dpi, TTX 350 300 dpi, TDI 6. Speed settings were corrected for 64-05 RFID. For DPM - 06 RFID max. material width was corrected.
  • Changed window handling so that port monitor setup windows can appear on Vista

[]

Select version & enter your information to download NOVEXX printer driver

Version

November 14, 2022

5.5.0

Installation guides

English

Tested on

Windows 8.1 | 10 | 11 | 8.1 | 10 | 11

Windows Server 2012 R2 | 2016 | 2019 | 2022 | 2012 | 2012 R2 | 2016 | 2019 | 2022

Supported Printers

NOVEXX COBRA

NOVEXX LION

NOVEXX PUMA

NOVEXX TIGER

NOVEXX TIGER XXL

NOVEXX XXTREME

NOVEXX Chess 64-04

NOVEXX Chess 64-05

NOVEXX Chess 64-06

NOVEXX Chess 64-08

NOVEXX Ocelot 200

NOVEXX Ocelot 300

NOVEXX Texxtile 200

NOVEXX Texxtile 300

NOVEXX Samba 720

NOVEXX LION RFID

NOVEXX PA 146

NOVEXX PA 156

NOVEXX PA 166

NOVEXX DPM 04

NOVEXX DPM 05

NOVEXX DPM 06

NOVEXX AP 4.4/5.4 200DPI

NOVEXX AP 4.4/5.4 300DPI

Release Notes

5.5.0

  • Updated driver package information and driver user interface look with new branding.

5.3.6

  • Corrected driver functionality when "Printer default" option is selected for media type.
  • Two new RTC formats are supported: YYJJJ and YY/JJJ. Previous format YYJJJYhhmmss is replaced with corrected YYJJJhhmmss and needs to be selected again on the existing label format.

5.3.03.7365

  • New printer model NovexxSolutions XPA 934 is supported.

5.3.03.7355

  • QR code position is improved for EasyPlug printers.

5.3.00.7216

  • All print mode options are available now for all printer models.

5.2.00.7100

  • XLP 506 printer models are supported.

5.2.00.6989

  • Driver sends now also distance of RFID antenna from label edge.
  • RFID Gen2 240bit tag is now correctly locked.

5.2.00.6875

  • EPC(class1) Gen2 240bit tag is encoded correctly now.

5.1.16.6678

  • NovexxSolutions XLP 504 600 dpi printer model was added.

5.1.16.6520

  • New printer models XLP 504 203dpi and XLP 504 300dpi were added into NovexxSolutions driver distribution.

5.1.16.6511

  • Fixed spooler crash when printing from NiceLabel 2017 to a printer using Advanced TCP/IP port.

5.1.15.6474

  • Port monitor crashed print spooler on the second print when using Advanced TCP/IP. This is fixed now.

5.1.15.6386

  • Encoding data into specific block number on RFID HF tags is now working properly for EasyPlug printers.

5.1.15.6376

  • Datamatrix barcode WYSIWYG is now OK also for Ratio different than "Auto".

[]

Select version & enter your information to download NOVEXX Solutions Legacy printer driver

Version

November 21, 2022

5.5.0

Installation guides

English

Tested on

Windows 8.1 | 10 | 11 | 8.1 | 10 | 11

Windows Server 2012 R2 | 2016 | 2019 | 2022 | 2012 | 2012 R2 | 2016 | 2019 | 2022

Supported Printers

NOVEXX Solutions 64-04

NOVEXX Solutions 64-04 RFID

NOVEXX Solutions 64-05

NOVEXX Solutions 64-05 RFID

NOVEXX Solutions 64-06

NOVEXX Solutions 64-06 RFID

NOVEXX Solutions 64-08

NOVEXX Solutions 64-08 RFID

NOVEXX Solutions ALX 734 PMA

NOVEXX Solutions ALX 735 PMA

NOVEXX Solutions ALX 736 PMA

NOVEXX Solutions ALX 924

NOVEXX Solutions ALX 924 RFID

NOVEXX Solutions ALX 925

NOVEXX Solutions ALX 925 RFID

NOVEXX Solutions ALX 926

NOVEXX Solutions ALX 926 RFID

NOVEXX Solutions AP 4.4 200dpi

NOVEXX Solutions AP 4.4 300dpi

NOVEXX Solutions AP 5.4 200dpi

NOVEXX Solutions AP 5.4 200dpi RFID

NOVEXX Solutions AP 5.4 300dpi

NOVEXX Solutions AP 5.4 300dpi RFID

NOVEXX Solutions AP 5.6 200dpi

NOVEXX Solutions AP 5.6 300dpi

NOVEXX Solutions DPM - 04

NOVEXX Solutions DPM - 04 RFID

NOVEXX Solutions DPM - 05

NOVEXX Solutions DPM - 05 RFID

NOVEXX Solutions DPM - 06

NOVEXX Solutions DPM - 06 RFID

NOVEXX Solutions PEM - 04

NOVEXX Solutions PEM - 05

NOVEXX Solutions PEM - 06

NOVEXX Solutions XLP 504 200dpi

NOVEXX Solutions XLP 504 300dpi

NOVEXX Solutions XLP 504 600dpi

NOVEXX Solutions XLP 506 200dpi

NOVEXX Solutions XLP 506 300dpi

NOVEXX Solutions XPA 934